Thread (11 messages) 11 messages, 3 authors, 2020-03-24

Re: [PATCH v2 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones

From: Rob Herring <robh@kernel.org>
Date: 2020-03-23 21:16:29
Also in: linux-arm-msm, linux-pm, lkml

On Mon, Mar 23, 2020 at 2:46 PM Amit Kucheria [off-list ref] wrote:
Hi Rob,

Thanks for the review.

On Wed, Mar 11, 2020 at 8:19 PM Rob Herring [off-list ref] wrote:
quoted
On Thu, Mar 05, 2020 at 06:26:43PM +0530, Amit Kucheria wrote:
quoted
As part of moving the thermal bindings to YAML, split it up into 3
bindings: thermal sensors, cooling devices and thermal zones.

The thermal-zone binding is a software abstraction to capture the
properties of each zone - how often they should be checked, the
temperature thresholds (trips) at which mitigation actions need to be
taken and the level of mitigation needed at those thresholds.
[...]
quoted
quoted
+          trips:
+            type: object
+            description:
+              This node describes a set of points in the temperature domain at
+              which the thermal framework needs to takes action. The actions to
+              be taken are defined in another node called cooling-maps.
+
+            patternProperties:
+              "^[a-zA-Z][a-zA-Z0-9,+\\._]{0,63}$":
Drop ',', '+', '.', and ideally '_'. Probably need to add '-'.
Dropping underscore flags a lot of DTs in dtbs_check. Do you want me
to go fix them or can we live with the underscore. Is there some
document I should read on why underscore isn't desirable?
Just convention. dtc will warn (with W=2), but we probably should
document that better. Anyways, fine to leave '_' here.

quoted
quoted
+            /* ... */
+
+            gpu-thermal-top {
This one is not going to match (which should cause an error).
Good catch. Unfortunately, this isn't getting caught. Nor is the
12-char limitation before -thermal in the thermal zone name. I can't
figure out why.
That's because this schema has to be included by another schema which
matches on a parent node containing 'thermal-zones'. If
'thermal-zones' can be at the root node, then you should rework this
such that you have $nodename: {const: thermal-zones} as a top-level
property.

Rob
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help