[PATCH v2 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
From: Wesley Cheng <hidden>
Date: 2020-03-23 20:17:26
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
The register map for SM8150 QMP USB SSPHY has moved QPHY_POWER_DOWN_CONTROL to a different offset. Allow for an offset in the register table to override default value if it is a DP capable PHY. Signed-off-by: Wesley Cheng <redacted> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index cc04471..71a230a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c@@ -164,6 +164,7 @@ enum qphy_reg_layout { [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x44, [QPHY_PCS_STATUS] = 0x14, + [QPHY_COM_POWER_DOWN_CONTROL] = 0x40, }; static const unsigned int sdm845_ufsphy_regs_layout[] = {
@@ -1627,6 +1628,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) if (cfg->has_phy_com_ctrl) qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], SW_PWRDN); + else if (!cfg->has_phy_com_ctrl && cfg->regs[QPHY_COM_POWER_DOWN_CONTROL]) + qphy_setbits(pcs, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); else qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project