[PATCH v4 1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2020-03-19 12:20:27
Also in:
linux-arm-kernel, linux-media, lkml
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Deprecate usage of the clock-frequency property. The preferred method to set clock rates is to use assigned-clock-rates. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index 72ad992f77be..1c85c78ec58c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt@@ -8,7 +8,6 @@ Required Properties: - compatible: Value should be "ovti,ov5645". - clocks: Reference to the xclk clock. - clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds to the hardware pin PWDNB which is physically active low. - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +36,8 @@ Example: clocks = <&clks 200>; clock-names = "xclk"; - clock-frequency = <24000000>; + assigned-clocks = <&clks 200>; + assigned-clock-rates = <24000000>; vdddo-supply = <&camera_dovdd_1v8>; vdda-supply = <&camera_avdd_2v8>;
--
2.20.1