[PATCH 10/28] ARM: dts: mmp3: fix USB & USB PHY node names
From: Lubomir Rintel <lkundrak@v3.sk>
Date: 2020-03-17 09:40:25
Also in:
linux-gpio, linux-i2c, linux-media, linux-mmc, linux-rtc, linux-serial, linux-spi, linux-usb, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
There are better generic ones and the validation is going to complain:
mmp3-dell-ariel.dt.yaml: hsic@f0001000: $nodename:0: 'hsic@f0001000'
does not match '^usb(@.*)?'
mmp3-dell-ariel.dt.yaml: hsic@f0002000: $nodename:0: 'hsic@f0002000'
does not match '^usb(@.*)?'
...
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp3.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index eaff9b1bc1d9f..fc75f96106351 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi@@ -183,14 +183,14 @@ hsi0_mux: interrupt-controller@d42821d0 { mrvl,intc-nr-irqs = <5>; }; - usb_otg_phy0: usb-otg-phy@d4207000 { + usb_otg_phy0: usb-phy@d4207000 { compatible = "marvell,mmp3-usb-phy"; reg = <0xd4207000 0x40>; #phy-cells = <0>; status = "disabled"; }; - usb_otg0: usb-otg@d4208000 { + usb_otg0: usb@d4208000 { compatible = "marvell,pxau2o-ehci"; reg = <0xd4208000 0x200>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -201,7 +201,7 @@ usb_otg0: usb-otg@d4208000 { status = "disabled"; }; - hsic_phy0: hsic-phy@f0001800 { + hsic_phy0: usb-phy@f0001800 { compatible = "marvell,mmp3-hsic-phy", "usb-nop-xceiv"; reg = <0xf0001800 0x40>;
@@ -209,7 +209,7 @@ hsic_phy0: hsic-phy@f0001800 { status = "disabled"; }; - hsic0: hsic@f0001000 { + hsic0: usb@f0001000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0001000 0x200>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@ hsic0: hsic@f0001000 { status = "disabled"; }; - hsic_phy1: hsic-phy@f0002800 { + hsic_phy1: usb-phy@f0002800 { compatible = "marvell,mmp3-hsic-phy", "usb-nop-xceiv"; reg = <0xf0002800 0x40>;
@@ -231,7 +231,7 @@ hsic_phy1: hsic-phy@f0002800 { status = "disabled"; }; - hsic1: hsic@f0002000 { + hsic1: usb@f0002000 { compatible = "marvell,pxau2o-ehci"; reg = <0xf0002000 0x200>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1