[PATCH V5 3/3] dt-bindings: geni-se: Add binding for UART pin swap
From: Akash Asthana <hidden>
Date: 2020-03-13 10:29:46
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add documentation to support RX/TX/CTS/RTS pin swap in HW.
Signed-off-by: Akash Asthana <redacted>
---
Changes in V5:
- As per Matthias's comment, remove rx-tx-cts-rts-swap property from UART
child node.
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 533400b..85f9028 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml@@ -172,6 +172,12 @@ patternProperties: - description: UART core irq - description: Wakeup irq (RX GPIO) + rx-tx-swap: + description: RX and TX pins are swapped + + cts-rts-swap: + description: CTS and RTS pins are swapped + required: - compatible - interrupts
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project