Re: [PATCH v7 1/3] MIPS: DTS: CI20: add DT node for IR sensor
From: Paul Cercueil <paul@crapouillou.net>
Date: 2020-03-06 22:09:45
Also in:
linux-mips, lkml
Hi Nikolaus, Le ven., mars 6, 2020 at 22:06, H. Nikolaus Schaller [off-list ref] a écrit :
From: Alex Smith <redacted> The infrared sensor on the CI20 board is connected to a GPIO and can be operated by using the gpio-ir-recv driver. Add a DT node for the sensor to allow that driver to be used. Signed-off-by: Alex Smith <redacted> Signed-off-by: H. Nikolaus Schaller <redacted>
Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cheers, -Paul
quoted hunk ↗ jump to hunk
--- arch/mips/boot/dts/ingenic/ci20.dts | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/arch/mips/boot/dts/ingenic/ci20.dtsb/arch/mips/boot/dts/ingenic/ci20.dts index c340f947baa0..fc4e64200c3d 100644--- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts@@ -62,6 +62,11 @@ enable-active-high; }; + ir: ir { + compatible = "gpio-ir-receiver"; + gpios = <&gpe 3 GPIO_ACTIVE_LOW>; + }; + wlan0_power: fixedregulator@1 { compatible = "regulator-fixed"; regulator-name = "wlan0_power"; --2.23.0