Re: [PATCH v6 1/3] MIPS: DTS: CI20: add DT node for IR sensor
From: Paul Cercueil <paul@crapouillou.net>
Date: 2020-03-06 18:26:45
Also in:
linux-mips, lkml
Hi Nikolaus, Le ven., mars 6, 2020 at 18:29, H. Nikolaus Schaller [off-list ref] a écrit :
quoted hunk ↗ jump to hunk
From: Alex Smith <redacted> The infrared sensor on the CI20 board is connected to a GPIO and can be operated by using the gpio-ir-recv driver. Add a DT node for the sensor to allow that driver to be used. Signed-off-by: Alex Smith <redacted> Signed-off-by: H. Nikolaus Schaller <redacted> --- arch/mips/boot/dts/ingenic/ci20.dts | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/arch/mips/boot/dts/ingenic/ci20.dtsb/arch/mips/boot/dts/ingenic/ci20.dts index c340f947baa0..e6ae08c979ea 100644--- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts@@ -62,6 +62,11 @@ enable-active-high; }; + ir: ir-receiver {
According to Documentation/devicetree/bindings/media/rc.yaml, the node should be named just "ir". Cheers, -Paul
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
wlan0_power: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "wlan0_power";
--
2.23.0