[for-next PATCH v2 2/5] dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2020-03-03 16:00:54
Also in:
lkml, netdev
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
TI AM654x/J721E SoCs have the same PHY interface selection mechanism for CPSWx subsystem as TI SoCs (AM3/4/5/DRA7), but registers and bit-fields placement is different. This patch adds corresponding compatible strings to enable support for TI AM654x/J721E SoCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
index 50ce9ae0f7a5..83b78c1c0644 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt@@ -40,6 +40,7 @@ Required properties: "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform "ti,am43xx-phy-gmii-sel" for am43xx platform "ti,dm814-phy-gmii-sel" for dm814x platform + "ti,am654-phy-gmii-sel" for AM654x/J721E platform - reg : Address and length of the register set for the device - #phy-cells : must be 2. cell 1 - CPSW port number (starting from 1)
--
2.17.1