Thread (3 messages) 3 messages, 2 authors, 2020-02-29

Re: [PATCH 1/2] ARM: dts: remove g-use-dma from rockchip usb nodes

From: Heiko Stuebner <heiko@sntech.de>
Date: 2020-02-29 23:47:17
Also in: linux-arm-kernel, linux-rockchip, lkml

Am Freitag, 28. Februar 2020, 12:39:21 CET schrieb Johan Jonker:
A test with the command below gives these errors:

arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000:
'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'

'g-use-dma' is not a valid option in dwc2.yaml, so remove it
from all Rockchip dtsi files.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <redacted>
applied both patches for 5.7

Thanks
Heiko

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help