Per convention device nodes for SC7180 should be ordered by address.
This is currently not the case for the venus node, move it to the
correct position.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d5f04c..5f97945e16a4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -1332,6 +1332,32 @@ system-cache-controller@9200000 {
                        interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
                };

+               venus: video-codec@aa00000 {
+                       compatible = "qcom,sc7180-venus";
+                       reg = <0 0x0aa00000 0 0xff000>;
+                       interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                       power-domains = <&videocc VENUS_GDSC>,
+                                       <&videocc VCODEC0_GDSC>;
+                       power-domain-names = "venus", "vcodec0";
+                       clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                                <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                                <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                                <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                                <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+                       clock-names = "core", "iface", "bus",
+                                     "vcodec0_core", "vcodec0_bus";
+                       iommus = <&apps_smmu 0x0c00 0x60>;
+                       memory-region = <&venus_mem>;
+
+                       video-decoder {
+                               compatible = "venus-decoder";
+                       };
+
+                       video-encoder {
+                               compatible = "venus-encoder";
+                       };
+               };
+
                usb_1: usb@a6f8800 {
                        compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
                        reg = <0 0x0a6f8800 0 0x400>;