On Wed, 26 Feb 2020, H. Nikolaus Schaller wrote:

Hi,

quoted

Am 20.12.2019 um 13:24 schrieb Andreas Kemnade [off-list ref]:

In the variant RC5T619 the mfd has an RTC. This patchset adds
support for it. To do so it adds the missing register defines in 
rn5t618.h and general irq handling for that.
It seems that the irq definitions are the same except missing RTC
but due to missing ability to test that I do not add them here.

The rtc driver itself is based on 
https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-clara/kernel.tar.bz2
but heavily reworked.

It was tested on the Kobo Clara HD.

For cleaning up there is a separate off-topic patch:
mfd: rn5t618: cleanup i2c_device_id

Changes in v5:
- static rn5t618_irq_init
- PLATFORM_DEVID_NONE
- added some Acked-Bys

Changes in v4:
- use macros for IRQ definitions
- merge rn5t618-core.c and rn5t618-irq.c

Changes in v3:
- alignment cleanup
- output cleanup, remove useless toggling of alarm flag in rtc probe
- updated bindings description, so patch 1/5 becomes 2/6 and so on

Changes in v2:
- no dead code in irq code
- various improvements and cleanups in rtc driver itself

Andreas Kemnade (5):
 dt-bindings: mfd: rn5t618: Document optional property interrupts
 mfd: rn5t618: add IRQ support
 mfd: rn5t618: add RTC related registers
 mfd: rn5t618: add more subdevices
 rtc: rc5t619: add ricoh rc5t619 RTC driver

what has happened to this series?
It looks like something got lost so that it has not yet arrived in linux-next.

It won't show up in -next until it's been reviewed/applied.

If it's not been touched for a few weeks/months, assume it's slipped
through the gaps, collect all of the *-bys and submit a [RESEND].

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog