Re: [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens
From: Vinod Koul <vkoul@kernel.org>
Date: 2020-02-25 10:16:22
Also in:
linux-arm-msm, linux-pm, lkml
On 25-02-20, 13:01, Amit Kucheria wrote:
Fixes the following warnings: builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure): builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
I think the patch title should be "add qcom,sc7180-tsens to qcom-tsens.yaml" and it would be great to see explanation on how adding it fixes these warns. Relooking at series I think this applies to rest of the series too :) Thanks
quoted hunk ↗ jump to hunk
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure): builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected Signed-off-by: Amit Kucheria <redacted> --- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+)diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index eef13b9446a8..13e294328932 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml@@ -39,6 +39,7 @@ properties: - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,sdm845-tsens + - qcom,sc7180-tsens - const: qcom,tsens-v2 reg:-- 2.20.1
-- ~Vinod