[PATCH V4 3/3] dt-bindings: geni-se: Add binding for UART pin swap
From: Akash Asthana <hidden>
Date: 2020-02-17 09:38:00
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add documentation to support RX/TX/CTS/RTS pin swap in HW. Signed-off-by: Akash Asthana <redacted> --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 11530df..7e4b9af 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml@@ -165,6 +165,15 @@ patternProperties: - description: UART core irq - description: Wakeup irq (RX GPIO) + rx-tx-swap: + description: RX and TX pins are swap. + + cts-rts-swap: + description: CTS and RTS pins are swap. + + rx-tx-cts-rts-swap: + description: RX-TX and CTS-RTS both pairs are swap. + required: - compatible - interrupts
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project