Thread (1 message) 1 message, 1 author, 2020-02-14
STALE2331d

[PATCH AUTOSEL 5.4 063/459] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value

From: Sasha Levin <sashal@kernel.org>
Date: 2020-02-14 17:43:28
Also in: linux-fbdev, linux-iio, lkml, stable
Subsystem: analog devices inc iio drivers, iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Nuno Sá, Michael Hennerich, Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Beniamin Bia <redacted>

[ Upstream commit a6c4f77cb3b11f81077b53c4a38f21b92d41f21e ]

This patch set the correct value for oversampling maxItems. In the
original example, appears 3 items for oversampling while the maxItems
is set to 1, this patch fixes those issues.

Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Signed-off-by: Beniamin Bia <redacted>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cc544fdc38bea..bc8aed17800d3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -85,7 +85,7 @@ properties:
       Must be the device tree identifier of the over-sampling
       mode pins. As the line is active high, it should be marked
       GPIO_ACTIVE_HIGH.
-    maxItems: 1
+    maxItems: 3
 
   adi,sw-mode:
     description:
@@ -128,9 +128,9 @@ examples:
                 adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                 reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
                 adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-                                                &gpio 23 GPIO_ACTIVE_HIGH
-                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
                 standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                 adi,sw-mode;
         };
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help