[PATCH v4 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Date: 2020-02-07 02:00:21
Also in:
linux-arm-msm, linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
A USB connector should be a child node of the USB controller connector/usb-connector.txt. This patch adds an example of how to do this to the dwc3 binding descriptions. It is necessary to declare a connector as a child-node of a USB controller for role-switching to work, so this example should be helpful to others implementing that. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- Documentation/devicetree/bindings/usb/dwc3.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 66780a47ad85..4e1e4afccee6 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt@@ -121,4 +121,12 @@ dwc3@4a030000 { interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + + usb_con: connector { + compatible = "gpio-usb-b-connector"; + id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb3_vbus_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>; + }; };
--
2.25.0