Hi Andy,

On Mon, 2020-02-03 at 11:50 +0200, Andy Shevchenko wrote:

Other comments all accepted and will be addressed in v5.

...

quoted

+       priv->mux = devm_mux_control_get(&spi->dev, NULL);
+       ret = PTR_ERR_OR_ZERO(priv->mux);

This is a bit complicated.

quoted

+       if (ret) {

Why not simple do

  if (IS_ERR(priv->mux)) {
    ret = PTR_ERR(...);
    ...
  }

?

I've had other maintainers/reviewers suggest the opposite for patches
I've submitted to other subsystems which is why I went with
PTR_ERR_OR_ZERO. It also works well with the goto err_put_ctlr; which
needs ret to be set. It's not exactly a common pattern in the spi code
so I'd be happy to go the other way if that's the desired convention
for spi.

quoted

+               if (ret != -EPROBE_DEFER)
+                       dev_err(&spi->dev, "failed to get control-mux\n");
+               goto err_put_ctlr;
+       }
+       ctlr->dev.of_node = spi->dev.of_node;

I'm wondering why SPI core can't handle this by default (like GPIO
subsystem does).

We do have it for spi devices in of_register_spi_device(). I'm not
aware of any reason spi_register_controller() couldn't do the same for
controllers. It would affect a large number of drivers so should
probably be separate to this series. It's probably reasonably
automatable with coccinelle.