Re: [PATCH v1 2/2] iio: adc: modify NPCM reset support

On Thu, 30 Jan 2020 10:20:30 +0200
Tomer Maimon [off-list ref] wrote:

Hi Jonathan,

The patch replace reset ADC method from direct register access to using
reset driver (will applied next Linux version).
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?h=next-20200130&id=9c81b2ccf82da6e995b63e945afa882cfaa03ca9


The ADC dt-binding modified as well to use the new reset method (approved
by Rob Herring)
https://www.spinics.net/lists/devicetree/msg331327.html

Indeed the this modification require DT modification as it described in the
ADC dt-binding commit, is it an issue? Do you thnk I should describe it in
the commit?

Whether it is an issue depends on nuvoton business model.  Can they ensure
that all places the kernel is changed will also have appropriate dt updates?

If not, you need to make the code continue to function without the change
(fall back to old methods).  If they do have enough control to ensure it won't
break any systems out in the wild, then just add a note to say that is the
case to the commit message.

Reasons this sort of thing is sometimes safe include:
* preproduction part so no users outside of people who will expect
potential breakage
* dt and new kernel images only distributed in a firmware package, or
where build script used to build the firmware package will ensure they
match (this is a bmc chip I think, so I guess not many people build their own
kernels except via scripting to package everything up as a firmware image
of some type?)

Thanks,

Jonathan

Thanks,

Tomer



On Wed, 29 Jan 2020 at 22:01, Jonathan Cameron [off-list ref] wrote:

quoted

On Sun, 19 Jan 2020 13:00:32 +0200
Tomer Maimon [off-list ref] wrote:
 

quoted

Modify NPCM ADC reset support from
direct register access to reset controller support.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>  

Hmm.  This presumably breaks all old DT.

If that's not a problem please say why.

Jonathan
 

quoted

---
 drivers/iio/adc/npcm_adc.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index a6170a37ebe8..83bad2d5575d 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c

@@ -14,6 +14,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/reset.h>

 struct npcm_adc {
      bool int_status;

@@ -23,13 +24,9 @@ struct npcm_adc {
      struct clk *adc_clk;
      wait_queue_head_t wq;
      struct regulator *vref;
-     struct regmap *rst_regmap;
+     struct reset_control *reset;
 };

-/* NPCM7xx reset module */
-#define NPCM7XX_IPSRST1_OFFSET               0x020
-#define NPCM7XX_IPSRST1_ADC_RST              BIT(27)
-
 /* ADC registers */
 #define NPCM_ADCCON   0x00
 #define NPCM_ADCDATA  0x04

@@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info,  

int *val, u8 channel)  

quoted

                                             msecs_to_jiffies(10));
      if (ret == 0) {
              regtemp = ioread32(info->regs + NPCM_ADCCON);
-             if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
+             if (regtemp & NPCM_ADCCON_ADC_CONV) {
                      /* if conversion failed - reset ADC module */
-                     regmap_write(info->rst_regmap,  

NPCM7XX_IPSRST1_OFFSET,  

quoted

-                                  NPCM7XX_IPSRST1_ADC_RST);
+                     reset_control_assert(info->reset);
                      msleep(100);
-                     regmap_write(info->rst_regmap,  

NPCM7XX_IPSRST1_OFFSET,  

quoted

-                                  0x0);
+                     reset_control_deassert(info->reset);
                      msleep(100);

                      /* Enable ADC and start conversion module */

@@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device  

*pdev)  

quoted

      struct npcm_adc *info;
      struct iio_dev *indio_dev;
      struct device *dev = &pdev->dev;
-     struct device_node *np = pdev->dev.of_node;

      indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
      if (!indio_dev)

@@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device  

*pdev)  

quoted

      if (IS_ERR(info->regs))
              return PTR_ERR(info->regs);

+     info->reset = devm_reset_control_get(&pdev->dev, NULL);
+     if (IS_ERR(info->reset))
+             return PTR_ERR(info->reset);
+
      info->adc_clk = devm_clk_get(&pdev->dev, NULL);
      if (IS_ERR(info->adc_clk)) {
              dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");

@@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device  

*pdev)  

quoted

      div = div >> NPCM_ADCCON_DIV_SHIFT;
      info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) *  

2);  

quoted

-     if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
-             info->rst_regmap = syscon_regmap_lookup_by_compatible
-                     ("nuvoton,npcm750-rst");
-             if (IS_ERR(info->rst_regmap)) {
-                     dev_err(&pdev->dev, "Failed to find  

nuvoton,npcm750-rst\n");  

quoted

-                     ret = PTR_ERR(info->rst_regmap);
-                     goto err_disable_clk;
-             }
-     }
-
      irq = platform_get_irq(pdev, 0);
      if (irq <= 0) {
              ret = -EINVAL;