Marc

On 1/2/20 6:38 AM, Marc Kleine-Budde wrote:

On 12/10/19 5:32 PM, Dan Murphy wrote:

quoted

The parse config function now performs action on the device either
reading or writing and a reset.  If the regulator is managed it needs
to be turned on.  So turn on the regulator if available if the parsing
fails then turn off the regulator.

Another BTW:
Consider converting the switching of the vsup to runtime_pm.

Yet another one:
Why do you disable the clocks in the error path of tcan4x5x_can_probe(),
but never enable them?

quoted

out_clk:
	if (!IS_ERR(mcan_class->cclk)) {
		clk_disable_unprepare(mcan_class->cclk);
		clk_disable_unprepare(mcan_class->hclk);
	}

- please move the clock handling from the m_can.c to the individual
   driver
- please move the clock handling to runtime_pm in the individual driver
- remove the obsolete m_can_class_get_clocks()
- make runtime_pm mandatory

Ack to the above I have made these changes locally.  Will submit next week.

Dan

regards,
Marc