Thread (29 messages) 29 messages, 5 authors, 2020-03-05
STALE2328d
Revisions (4)
  1. v3 [diff vs current]
  2. v4 [diff vs current]
  3. v5 [diff vs current]
  4. v6 current

[PATCH v6 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes

From: Remi Pommarel <hidden>
Date: 2020-01-23 23:22:34
Also in: linux-amlogic, linux-pci, lkml
Subsystem: arm/amlogic meson soc support, the rest · Maintainers: Neil Armstrong, Kevin Hilman, Linus Torvalds

Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE
reliable on AXG SoC.

Signed-off-by: Remi Pommarel <redacted>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..08a178aa0133 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
 #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -1104,6 +1105,12 @@ hiubus: bus@ff63c000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
 
+			mipi_analog_phy: phy@0 {
+				compatible = "amlogic,axg-mipi-pcie-analog-phy";
+				reg = <0x0 0x0 0x0 0xc>;
+				#phy-cells = <1>;
+			};
+
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-axg-hhi-sysctrl",
 					     "simple-mfd", "syscon";
@@ -1356,6 +1363,15 @@ tdmout_c: audio-controller@580 {
 			};
 		};
 
+		pcie_phy: bus@ff644000 {
+			compatible = "amlogic,axg-pcie-phy";
+			reg = <0x0 0xff644000 0x0 0x1c>;
+			resets = <&reset RESET_PCIE_PHY>;
+			phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+		};
+
 		aobus: bus@ff800000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff800000 0x0 0x100000>;
-- 
2.24.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help