[PATCH v2 2/7] ARM: dts: sun7i: Add CSI1 controller and pinmux options
From: Chen-Yu Tsai <wens@kernel.org>
Date: 2020-01-06 08:42:47
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Chen-Yu Tsai <redacted> The CSI controller driver now supports the second CSI controller, CSI1. Add a device node for it. Pinmuxing options for the MCLK output, the standard 8-bit interface, and a secondary 24-bit interface are included. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun7i-a20.dtsi | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd6accf..92b5be97085d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi@@ -729,6 +729,17 @@ ohci1: usb@1c1c400 { status = "disabled"; }; + csi1: csi@1c1d000 { + compatible = "allwinner,sun7i-a20-csi1", + "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; + status = "disabled"; + }; + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>;
@@ -802,6 +813,31 @@ csi0_clk_pin: csi-clk-pin { function = "csi0"; }; + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2",
--
2.24.1