Re: [PATCH v7 1/5] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks

On Fri, Nov 22, 2019 at 11:45:00PM +0200, Leonard Crestez wrote:

These clocks are only modified as part of DRAM frequency switches during
which DRAM itself is briefly inaccessible. The switch is performed with
a SMC call to by TF-A which runs from a SRAM area; upon returning to
linux several clocks bits are modified and we need to update them.

For rate bits an easy solution is to just mark with
CLK_GET_RATE_NOCACHE so that new rates are always read back from
registers.

Signed-off-by: Leonard Crestez <redacted>
Reviewed-by: Abel Vesa <redacted>

Applied, thanks.