On 16.09.2019 11:01, Brian Masney wrote:

Hi Andrzej,

On Mon, Sep 16, 2019 at 10:13:58AM +0200, Andrzej Hajda wrote:

quoted

Hi Brian,

On 15.08.2019 02:48, Brian Masney wrote:

quoted

This patch series begins to add support for the external display over
HDMI that is supported on msm8974 SoCs. I'm testing this series on the
Nexus 5, and I'm able to communicate with the HDMI bridge via the
analogix-anx78xx driver, however the external display is not working
yet.

When I plug in the HDMI cable, the monitor detects that a device is
hooked up, but nothing is shown on the external monitor. The hot plug
detect GPIO (hpd-gpios) on the analogix-anx78xx bridge and MSM HDMI
drivers do not change state when the slimport adapter or HDMI cable is
plugged in or removed. I wonder if a regulator is not enabled somewhere?
I have a comment in patch 10 regarding 'hpd-gdsc-supply' that may
potentially be an issue.

I'm still digging in on this, however I'd appreciate any feedback if
anyone has time. Most of these patches are ready now, so I marked the
ones that aren't ready with 'PATCH RFC'.

I'm using an Analogix Semiconductor SP6001 SlimPort Micro-USB to 4K HDMI
Adapter to connect my phone to an external display via a standard HDMI
cable. This works just fine with the downstream MSM kernel using
Android.

This patchset risks to be forgotten. To avoid it, at least partially, I
can merge patches 1-5, is it OK for you?

That would be great if you could do that.

I have queued 1-4 to drm-misc-next. 5th patch requires some discussion.


Regards

Andrzej

Thanks,

Brian

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel