Re: [RFC PATCH V3 2/4] media: platform: Add Mediatek sensor interface driver KConfig
From: Sakari Ailus <hidden>
Date: 2019-08-26 11:53:09
Also in:
linux-arm-kernel, linux-media, linux-mediatek
On Thu, Jun 06, 2019 at 06:00:31PM +0800, Louis Kuo wrote:
quoted hunk
This patch adds KConfig for sensor interface driver. Sensor interface driver is a MIPI-CSI2 host driver, namely, a HW camera interface controller. It support a widely adopted, simple, high-speed protocol primarily intended for point-to-point image and video transmission between cameras and host devices. Signed-off-by: Louis Kuo <louis.kuo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 drivers/media/platform/mtk-isp/Kconfigdiff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig new file mode 100644 index 0000000..bc7fd01 --- /dev/null +++ b/drivers/media/platform/mtk-isp/Kconfig@@ -0,0 +1,17 @@ +config MTK_SENINF + bool "Mediatek mipi csi2 driver" + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select V4L2_FWNODE + + default n + help + This driver provides a mipi-csi2 host driver used as a + interface to connect camera with Mediatek's + MT8183 SOCs. It is able to handle multiple cameras + at the same time. + + Choose y if you want to use Mediatek SoCs to create image + capture application such as video recording and still image + capture.
Rather than being a separate patch, this should go in with the driver. The DT bindings should precede the driver, and you'll need a MAINTAINERS entry for the driver, too. -- Sakari Ailus