Re: [PATCH 3/6] arm64: dts: ti: k3-j721e: Add gpio nodes in wakeup domain
From: Keerthy <j-keerthy@ti.com>
Date: 2019-08-09 14:54:29
Also in:
linux-arm-kernel, linux-gpio
On 09/08/19 1:59 PM, Lokesh Vutla wrote:
Similar to the gpio groups in main domain, there is one gpio group in wakup domain with 2 module instances in it. This gpio group pins out 84 lines(6 banks). Add DT node for these 2 gpio module instances.
Reviewed-by: Keerthy <j-keerthy@ti.com>
quoted hunk ↗ jump to hunk
Signed-off-by: Lokesh Vutla <redacted> --- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index e616c2481f51..555dc7b7aedc 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi@@ -87,4 +87,38 @@ ti,sci-dst-id = <14>; ti,sci-rm-range-girq = <0x5>; }; + + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42110000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <113 0>, <113 1>, <113 2>, + <113 3>, <113 4>, <113 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42100000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <114 0>, <114 1>, <114 2>, + <114 3>, <114 4>, <114 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; };