[PATCH v2 08/15] arm64: dts: sdm845: thermal: Add interrupt support
From: Amit Kucheria <hidden>
Date: 2019-08-27 12:15:01
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Register upper-lower interrupts for each of the two tsens controllers. Signed-off-by: Amit Kucheria <redacted> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 88 +++++++++++++++------------- 1 file changed, 46 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 4babff5f19b5c..fdd74c39b744e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi@@ -2386,6 +2386,8 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; };
@@ -2394,6 +2396,8 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; };
@@ -2712,8 +2716,8 @@ thermal-zones { cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 1>;
@@ -2756,8 +2760,8 @@ }; cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 2>;
@@ -2800,8 +2804,8 @@ }; cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 3>;
@@ -2844,8 +2848,8 @@ }; cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 4>;
@@ -2888,8 +2892,8 @@ }; cpu4-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 7>;
@@ -2932,8 +2936,8 @@ }; cpu5-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 8>;
@@ -2976,8 +2980,8 @@ }; cpu6-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 9>;
@@ -3020,8 +3024,8 @@ }; cpu7-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 10>;
@@ -3064,8 +3068,8 @@ }; aoss0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 0>;
@@ -3079,8 +3083,8 @@ }; cluster0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 5>;
@@ -3099,8 +3103,8 @@ }; cluster1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 6>;
@@ -3119,8 +3123,8 @@ }; gpu-thermal-top { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 11>;
@@ -3134,8 +3138,8 @@ }; gpu-thermal-bottom { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens0 12>;
@@ -3149,8 +3153,8 @@ }; aoss1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 0>;
@@ -3164,8 +3168,8 @@ }; q6-modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 1>;
@@ -3179,8 +3183,8 @@ }; mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 2>;
@@ -3194,8 +3198,8 @@ }; wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 3>;
@@ -3209,8 +3213,8 @@ }; q6-hvx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 4>;
@@ -3224,8 +3228,8 @@ }; camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 5>;
@@ -3239,8 +3243,8 @@ }; video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 6>;
@@ -3254,8 +3258,8 @@ }; modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + polling-delay-passive = <0>; + polling-delay = <0>; thermal-sensors = <&tsens1 7>;
--
2.17.1