[PATCH v8 4/5] ARM: dts: sun7i: Add CSI0 controller
From: Maxime Ripard <mripard@kernel.org>
Date: 2019-08-22 08:21:43
Also in:
linux-arm-kernel, linux-media, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Maxime Ripard <redacted> The CSI controller embedded in the A20 can be supported by our new driver. Let's add it to our DT. Signed-off-by: Maxime Ripard <redacted> --- arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9ad8e445b240..713c20be8c7a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi@@ -376,6 +376,17 @@ num-cs = <1>; }; + csi0: csi@1c09000 { + compatible = "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>, + <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "mod", "isp", "ram"; + resets = <&ccu RST_CSI0>; + status = "disabled"; + }; + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>;
@@ -775,6 +786,20 @@ }; /omit-if-no-ref/ + csi0_8bits_pins: csi-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_clk_pin: csi-clk-pin { + pins = "PE1"; + function = "csi0"; + }; + + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6",
--
git-series 0.9.1