[PATCH v4 4/8] arm64: dts: qcom: pm8150l: Add base dts file
From: Vinod Koul <vkoul@kernel.org>
Date: 2019-08-21 18:44:26
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
PMIC pm8150l is a slave pmic and this adds base DTS file for pm8150l with power-on, adc and gpio nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <redacted> --- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 80 +++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8150l.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
new file mode 100644
index 000000000000..eb0e9a090e42
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi@@ -0,0 +1,80 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@4 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, + <0x4 0xc1 0x0 IRQ_TYPE_NONE>, + <0x4 0xc2 0x0 IRQ_TYPE_NONE>, + <0x4 0xc3 0x0 IRQ_TYPE_NONE>, + <0x4 0xc4 0x0 IRQ_TYPE_NONE>, + <0x4 0xc5 0x0 IRQ_TYPE_NONE>, + <0x4 0xc6 0x0 IRQ_TYPE_NONE>, + <0x4 0xc7 0x0 IRQ_TYPE_NONE>, + <0x4 0xc8 0x0 IRQ_TYPE_NONE>, + <0x4 0xc9 0x0 IRQ_TYPE_NONE>, + <0x4 0xca 0x0 IRQ_TYPE_NONE>, + <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@5 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +};
--
2.20.1