[PATCH net-next v3 3/4] dt-bindings: net: fsl: enetc: Add bindings for the central MDIO PCIe endpoint
From: Claudiu Manoil <claudiu.manoil@nxp.com>
Date: 2019-07-29 10:04:16
Also in:
linux-arm-kernel, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The on-chip PCIe root complex that integrates the ENETC ethernet controllers also integrates a PCIe endpoint for the MDIO controller providing for centralized control of the ENETC mdio bus. Add bindings for this "central" MDIO Integrated PCIe Endpoint. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> --- v1 - none v2 - none v3 - fixed spelling (commit message mostly) .../devicetree/bindings/net/fsl-enetc.txt | 42 +++++++++++++++++-- 1 file changed, 39 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index 25fc687419db..b7034ccbc1bd 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt@@ -11,7 +11,9 @@ Required properties: to parent node bindings. - compatible : Should be "fsl,enetc". -1) The ENETC external port is connected to a MDIO configurable phy: +1. The ENETC external port is connected to a MDIO configurable phy + +1.1. Using the local ENETC Port MDIO interface In this case, the ENETC node should include a "mdio" sub-node that in turn should contain the "ethernet-phy" node describing the
@@ -47,8 +49,42 @@ Example: }; }; -2) The ENETC port is an internal port or has a fixed-link external -connection: +1.2. Using the central MDIO PCIe endpoint device + +In this case, the mdio node should be defined as another PCIe +endpoint node, at the same level with the ENETC port nodes. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc-mdio". + +The remaining required mdio bus properties are standard, their bindings +already defined in Documentation/devicetree/bindings/net/mdio.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + }; + + mdio@0,3 { + compatible = "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + +2. The ENETC port is an internal port or has a fixed-link external +connection In this case, the ENETC port node defines a fixed link connection, as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
--
2.17.1