Re: [PATCH v3 0/9] Multicolor Framework update

Hi!

Am Donnerstag, 23. Mai 2019, 14:08:11 CEST schrieb Dan Murphy:

quoted

  leds: multicolor: Add sysfs interface definition
  dt: bindings: Add multicolor class dt bindings documention
  documention: leds: Add multicolor class documentation
  dt-bindings: leds: Add multicolor ID to the color ID  list
  leds: Add multicolor ID to the color ID list
  leds: multicolor: Introduce a multicolor class definition
  dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  leds: lp50xx: Add the LP50XX family of the RGB LED driver
  leds: Update the lp55xx to use the multi color framework

While not having much experience with the implementation of the LED subsystem, 
I've had a short look at those. Curious question: would it be possible to take 
three gpio-leds and group those together to one multicolor-led? I know at 
least one board, where things are wired up like this, see e.g. 
at91-sama5d27_som1_ek.dts

Probably could be done, but is not really a good match. Multicolor was meant for
LEDs with many brightness levels.

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html