Pawel,

On 05/06/2019 13:03, Pawel Laszczak wrote:

quoted

This patch aim at documenting USB related dt-bindings for the
Cadence USBSS-DRD controller.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>

---
 .../devicetree/bindings/usb/cdns-usb3.txt     | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt

diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
new file mode 100644
index 000000000000..1d2b449e3cb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt

@@ -0,0 +1,30 @@
+Binding for the Cadence USBSS-DRD controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register areas.
+	 Controller has 3 different regions:
+	 region 1 - HOST registers area
+	 region 2 - DEVICE registers area
+	 region 3 - OTG/DRD registers area
+  - reg-names - register memory area names:
+	"xhci" - for HOST registers space
+	"dev" - for DEVICE registers space
+	"otg" - for OTG/DRD registers space
+  - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
+  - interrupts: Interrupts used by cdns3 controller.

Since we are requesting 3 separate named interrupts in code we need to
mention them here.

Hi Roger, 

Yes, I know, but this code is Reviewed-by: Rob Herring, so I thought to add 
this as separate patch after putting this driver into kernel.

I assume that after making some change in this file I should remove statement
Reviewed-by: Rob Herring <robh@kernel.org> from this patch to start reviving 
from the beginning.  

What do you think about such dt-binding:

Required properties:
  - reg: Physical base address and size of the controller's register areas.
         Controller has 3 different regions:
         region 1 - HOST registers area
         region 2 - DEVICE registers area
         region 3 - OTG/DRD registers area
  - reg-names - register memory area names:
        "xhci" - for HOST registers space
        "dev" - for DEVICE registers space
        "otg" - for OTG/DRD registers space
  - compatible: Should contain:
        "cdns,usb3-1.0.0" - for 0x00024502 controller version
        "cdns,usb3-1.0.1" - for 0x00024509 controller version
        "cdns,usb3-1.0.2" - for 0x0002450C controller version
        "cdns,usb3-1.0.3" - for 0x0002450d controller version

- interrupts: Interrupts used by cdns3 controller:
        "host" - interrupt used by XHCI driver.
        "peripheral" - interrupt used by device driver
        "otg" - interrupt used by DRD/OTG  part of driver

Optional properties:
 - maximum-speed : valid arguments are "super-speed", "high-speed" and
                   "full-speed"; refer to usb/generic.txt
 - dr_mode: Should be one of "host", "peripheral" or "otg".
 - phys: reference to the USB PHY
 - on-chip-buff-size : size of memory intended as internal memory for endpoints
        buffers expressed in KB

Example:
        usb@f3000000 {
                compatible = "cdns,usb3-1.0.1";
                interrupts = <USB_HOST_IRQ  7 IRQ_TYPE_LEVEL_HIGH>
                                <USB_DEVICE_IRQ  7 IRQ_TYPE_LEVEL_HIGH>
                                <USB_OTG_IRQ  8 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "host", "peripheral", "otg";
                reg = <0xf3000000 0x10000       /* memory area for HOST registers */
                        0xf3010000 0x10000      /* memory area for DEVICE registers */
                        0xf3020000 0x10000>;    /* memory area for OTG/DRD registers */
                reg-names = "xhci", "dev", "otg";
        };

Is this correct now ?

Maybe I should add something additionally for phy ?

Regards,
Pawel

  

quoted

+
+Optional properties:
+ - maximum-speed : valid arguments are "super-speed", "high-speed" and
+                   "full-speed"; refer to usb/generic.txt
+ - dr_mode: Should be one of "host", "peripheral" or "otg".
+ - phys: reference to the USB PHY
+
+Example:
+	usb@f3000000 {
+		compatible = "cdns,usb3-1.0.1";
+		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;

This example won't work as code requests for 3 separate interrupts.

quoted

+		reg = <0xf3000000 0x10000	/* memory area for HOST registers */
+			0xf3010000 0x10000	/* memory area for DEVICE registers */
+			0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
+		reg-names = "xhci", "dev", "otg";
+	};

--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki