Thread (12 messages) 12 messages, 4 authors, 2019-05-27

Re: [PATCH v7 1/3] dt-bindings: i2c: extend existing opencore bindings.

From: Sagar Kadam <hidden>
Date: 2019-05-27 13:25:54
Also in: linux-i2c, linux-riscv, lkml

Hi Rob,

On Sat, May 25, 2019 at 2:10 AM Rob Herring [off-list ref] wrote:
On Wed, May 22, 2019 at 02:29:32PM +0530, Sagar Shrikant Kadam wrote:
quoted
Reformatted compatibility strings to one valid combination on
each line.
Add FU540-C000 specific device tree bindings to already available
i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board. Move interrupt under optional
property list as this can be optional.

The FU540-C000 SoC from sifive, has an Opencore's I2C block
reimplementation.

The DT compatibility string for this IP is present in HDL and available at.
https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73

Signed-off-by: Sagar Shrikant Kadam <redacted>
---
 Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index 17bef9a..db96951 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -1,9 +1,13 @@
 Device tree configuration for i2c-ocores

 Required properties:
-- compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
+- compatible      : "opencores,i2c-ocores",
+                    "aeroflexgaisler,i2cmst",
+                    "sifive,fu540-c000-i2c","sifive,i2c0".
space needed                                   ^

And drop the end of line commas and period.

quoted
+                    For Opencore based I2C IP block reimplemented in
+                    FU540-C000 SoC.Please refer sifive-blocks-ip-versioning.txt
And here too.

And 'refer to'
I will incorporate the changes you have suggested.

Thanks,
Sagar Kadam
quoted
+                    for additional details.
 - reg             : bus address start and address range size of device
-- interrupts      : interrupt number
 - clocks          : handle to the controller clock; see the note below.
                     Mutually exclusive with opencores,ip-clock-frequency
 - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
@@ -12,6 +16,7 @@ Required properties:
 - #size-cells     : should be <0>

 Optional properties:
+- interrupts      : interrupt number.
 - clock-frequency : frequency of bus clock in Hz; see the note below.
                     Defaults to 100 KHz when the property is not specified
 - reg-shift       : device register offsets are shifted by this value
--
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help