[PATCH v4 1/3] dt-bindings: i2c: extend existing opencore bindings.
From: Sagar Shrikant Kadam <hidden>
Date: 2019-05-20 12:49:56
Also in:
linux-i2c, linux-riscv, lkml
Subsystem:
i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add FU540-C000 specific device tree bindings to already available i2-ocores file. This device is available on HiFive Unleashed Rev A00 board. Move interrupt and interrupt parents under optional property list as these can be optional. The FU540-C000 SoC from sifive, has an Opencore's I2C block reimplementation. The DT compatibility string for this IP is present in HDL and available at. https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73 Signed-off-by: Sagar Shrikant Kadam <redacted> --- Documentation/devicetree/bindings/i2c/i2c-ocores.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
index 17bef9a..b73960e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt@@ -2,8 +2,11 @@ Device tree configuration for i2c-ocores Required properties: - compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst" + "sifive,fu540-c000-i2c" or "sifive,i2c0". + for Opencore based I2C IP block reimplemented in + FU540-C000 SoC.Please refer sifive-blocks-ip-versioning.txt + for additional details. - reg : bus address start and address range size of device -- interrupts : interrupt number - clocks : handle to the controller clock; see the note below. Mutually exclusive with opencores,ip-clock-frequency - opencores,ip-clock-frequency: frequency of the controller clock in Hz;
@@ -12,6 +15,8 @@ Required properties: - #size-cells : should be <0> Optional properties: +- interrupt-parent: handle to interrupt controller. +- interrupts : interrupt number. - clock-frequency : frequency of bus clock in Hz; see the note below. Defaults to 100 KHz when the property is not specified - reg-shift : device register offsets are shifted by this value
--
1.9.1