[PATCH v5 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property
From: Guillaume La Roque <glaroque@baylibre.com>
Date: 2019-05-10 08:23:59
Also in:
linux-amlogic, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Add optional drive-strength-microamp property Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> --- Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index a47dd990a8d3..a7618605bf1e 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt@@ -51,6 +51,10 @@ Configuration nodes support the generic properties "bias-disable", "bias-pull-up" and "bias-pull-down", described in file pinctrl-bindings.txt +Optional properties : + - drive-strength-microamp: Drive strength for the specified pins in uA. + This property is only valid for G12A and newer. + === Example === pinctrl: pinctrl@c1109880 {
--
2.17.1