[PATCHi 3/3] arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
DORMANTno replies
From: Jonas Karlman <jonas@kwiboo.se>
Date: 2019-03-02 17:03:20
Also in:
linux-arm-kernel, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add ir-receiver node to enable on-board IR on Rock64. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index c4031b7718fc..25d0f57254fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts@@ -79,6 +79,13 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + sound { compatible = "audio-graph-card"; label = "rockchip,rk3328";
@@ -297,6 +304,12 @@ }; &pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
--
2.17.1