[RFC PATCH V0 4/4] dts: arm64: mt8183: Add sensor interface nodes
From: Louis Kuo <hidden>
Date: 2019-02-21 07:21:58
Also in:
linux-arm-kernel, linux-media, linux-mediatek
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
Add nodes for Mediatek's sensor interface device. Sensor interface module embedded in Mediatek SOCs, works as a HW camera interface controller intended for image and data transmission between cameras and host devices. Signed-off-by: Louis Kuo <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 34 ++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c3a516e..2fe97e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -474,4 +474,38 @@ #clock-cells = <1>; }; }; + + seninf: seninf@1a040000 { + compatible = "mediatek,mt8183-seninf"; + reg = <0 0x1a040000 0 0x8000>, + <0 0x11C80000 0 0x6000>; + reg-names = "base_reg", "rx_reg"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + clocks = + <&camsys CLK_CAM_SENINF>, + <&topckgen CLK_TOP_MUX_SENINF>; + clock-names = + "CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF"; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + mipi_in_cam0: endpoint@0 { + reg = <0>; + data-lanes = <1 3>; + }; + }; + + port@1 { + reg = <1>; + mipi_in_cam1: endpoint@0 { + reg = <1>; + data-lanes = <1 3>; + }; + }; + }; + }; };
--
1.9.1