[PATCH v2 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
From: Chen-Yu Tsai <hidden>
Date: 2019-02-25 03:31:28
Also in:
linux-arm-kernel, linux-pm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 12 ++++++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++ 2 files changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 838be7b3715f..9d34eabba121 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts@@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fcbec3d7ccd7..ea299d3d84d0 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts@@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay";
--
2.20.1