[PATCH v7 02/23] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection
From: Jagan Teki <hidden>
Date: 2019-02-01 15:42:58
Also in:
dri-devel, linux-arm-kernel, linux-clk, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chen-Yu Tsai, Linus Torvalds
Instruction loop selection would require before writing loop number registers, so enable idle, LP11 bits on loop selection register. Reference code available in BSP (from linux-sunxi/ drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) (dsi_dev[sel]->dsi_inst_loop_sel.dwval = 2<<(4*DSI_INST_ID_LP11) | 3<<(4*DSI_INST_ID_DLY); Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Tested-by: Merlijn Wajer <redacted> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index a5fcee750bee..813d5523f1c7 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c@@ -403,6 +403,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi, { u16 delay = sun6i_dsi_setup_inst_delay(dsi, mode); + regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG, + DSI_INST_ID_HSC << (4 * DSI_INST_ID_LP11) | + DSI_INST_ID_HSD << (4 * DSI_INST_ID_DLY)); regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0), SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) | SUN6I_DSI_INST_LOOP_NUM_N1(delay));
--
2.18.0.321.gffc6fa0e3