Re: [PATCH v8 3/5] arm64: dts: lx2160a: add FlexSPI node property
From: Shawn Guo <shawnguo@kernel.org>
Date: 2019-02-01 02:54:25
Also in:
linux-arm-kernel, linux-spi, lkml
On Tue, Jan 15, 2019 at 12:00:26PM +0000, Yogesh Narayan Gaur wrote:
quoted hunk ↗ jump to hunk
Add fspi node property for LX2160A SoC for FlexSPI driver. Property added for the FlexSPI controller and for the connected slave device for the LX2160ARDB target. This is having two SPI-NOR flash device, mt35xu512aba, connected at CS0 and CS1. Signed-off-by: Yogesh Narayan Gaur <redacted> --- Changes for v8: - None Changes for v7: - None Changes for v6: - None Changes for v5: - None Changes for v4: - Incorporated Rob review comments. Changes for v3: - None. Changes for v2: - Incorporated Shawn review comments. .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 22 +++++++++++++++++++ .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 13 +++++++++++ 2 files changed, 35 insertions(+)diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 6481e5f20e69..70658946fbbe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts@@ -50,6 +50,28 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + mt35xu512aba1: flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; + &i2c0 { status = "okay";diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index a79f5c1ea56d..e3ff86201f73 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi@@ -762,5 +762,18 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; }; + + fspi: spi@20c0000 {
To keep the nodes sorted in unit-address, it should go after i2c@2070000.
+ compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>;
I would align the indentation with the above.
+ reg-names = "fspi_base", "fspi_mmap"; + interrupts = <0 25 0x4>; /* Level high type */
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; so that we can save the comment there. I fixed up all these small things and applied the patch. Shawn
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; }; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel