Re: [PATCH RESEND v1 0/4] dt-binding: clk: prepare for imx8qm clock support
From: Shawn Guo <shawnguo@kernel.org>
Date: 2019-01-16 11:02:17
Also in:
linux-arm-kernel, linux-clk
On Wed, Jan 16, 2019 at 05:40:01AM +0000, Aisheng Dong wrote:
Ping... BTW, as the first two patches change the same firmware binding doc fs.scu.txt. I'm not sure whether it should go to Shawn's tree for the binding part, or Stephen's clock tree. Shawn & Stephen, What's your suggestion?
I can apply the first two to my tree as long as Rob and Stephen ack on them. Shawn
Regards Dong Aishengquoted
From: Aisheng Dong [mailto:aisheng.dong@nxp.com] Sent: Friday, January 11, 2019 7:56 PM After a bit more investigation on IMX8QM, it seemed SCU clock can be used in a similar way as IMX8QXP. So update the binding and driver to be a bit generic for easily extension of IMX8QM support later. Dong Aisheng (4): dt-bindings: fsl: scu: add fallback compatible string for clock dt-bindings: fsl: scu: add imx8qm scu clock support clk: imx: scu: add fallback compatible string support dt-bindings: imx8-clock: add a53 and a72 clock id Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 7 +++++-- drivers/clk/imx/clk-imx8qxp.c | 1 + include/dt-bindings/clock/imx8-clock.h | 6 ++++-- 3 files changed, 10 insertions(+), 4 deletions(-) -- 2.7.4