[PATCH v2 1/2] dt-bindings: iio: imu: add icm20602 bindings to mpu6050
flat view
STALE2808d
From: Randolph Maaßen <hidden>
Date: 2019-01-28 18:50:29
Also in:
linux-iio, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Adding the invensense ICM-20602 to the compatible list of the mpu6050 driver Signed-off-by: Randolph Maaßen <redacted> --- Changes in v2: - write i2c disable register using reg_set instead of define - decide to write to i2c disable register based on reg_set instead of chip type --- Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index 6ab9a9d196b0..268bf7568e19 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt@@ -11,6 +11,7 @@ Required properties: "invensense,mpu9250" "invensense,mpu9255" "invensense,icm20608" + "invensense,icm20602" - reg : the I2C address of the sensor - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
--
2.11.0