[PATCH v2 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
flat view
STALE2814d
SUPERSEDED
From: Tomasz Duszynski <tduszyns@gmail.com>
Date: 2019-01-27 18:20:07
Also in:
linux-iio, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
- v4 [diff vs current]
Add device tree support for Plantower PMS7003 particulate matter sensor. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> --- .../iio/chemical/plantower,pms7003.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..e4c7f2fb1e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt@@ -0,0 +1,19 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" + +Optional properties: +- vcc-supply: phandle to the regulator that provides power to the sensor +- set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + pms7003 { + compatible = "plantower,pms7003"; + }; +};
--
2.20.1