On Mon, Dec 3, 2018 at 5:46 PM Jagan Teki [off-list ref] wrote:

On Fri, Nov 30, 2018 at 1:28 PM Chen-Yu Tsai [off-list ref] wrote:

quoted

Some camera modules have the SoC feeding a master clock to the sensor
instead of having a standalone crystal. This clock signal is generated
from the clock control unit and output from the CSI MCLK function of
pin PE1.

Add a pinmux setting for it for camera sensors to reference.

Signed-off-by: Chen-Yu Tsai <redacted>
---

On Fri, Nov 30, 2018 at 1:29 PM Chen-Yu Tsai [off-list ref] wrote:

quoted

The CSI controller found on the H3 (and H5) is a reduced version of the
one found on the A31. It only has 1 channel, instead of 4 channels for
time-multiplexed BT.656. Since the H3 is a reduced version, it cannot
"fallback" to a compatible that implements more features than it
supports.

Drop the A31 fallback compatible.

Fixes: f89120b6f554 ("ARM: dts: sun8i: Add the H3/H5 CSI controller")
Signed-off-by: Chen-Yu Tsai <redacted>
---

Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

Not merging this one, as there are no boards in tree that directly use this.

ChenYu