[PATCH v2 3/9] dt-bindings: phy: qcom-ufs: Add resets property
From: Evan Green <hidden>
Date: 2019-01-23 22:12:14
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, universal flash storage host controller driver · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add a resets property to the PHY that represents the PHY reset register in the UFS controller itself. This better describes the complete specification of the PHY, and allows the PHY to perform its initialization in a single function, rather than relying on back-channel sequencing of initialization through the PHY framework. Signed-off-by: Evan Green <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes in v2: - Added resets to example (Stephen). Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
index 21d9a93db2e97..fd59f93e95562 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt@@ -29,6 +29,7 @@ Optional properties: - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply - vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply +- resets : specifies the PHY reset in the UFS controller Example:
@@ -51,9 +52,11 @@ Example: <&clock_gcc clk_ufs_phy_ldo>, <&clock_gcc clk_gcc_ufs_tx_cfg_clk>, <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; + resets = <&ufshc 0>; }; - ufshc@fc598000 { + ufshc: ufshc@fc598000 { + #reset-cells = <1>; ... phys = <&ufsphy1>; phy-names = "ufsphy";
--
2.18.1