Re: [PATCH v4 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties
From: Bjorn Andersson <hidden>
Date: 2019-01-15 00:43:13
Also in:
linux-arm-msm, linux-gpio, lkml
On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues.
Reviewed-by: Bjorn Andersson <redacted>
quoted hunk ↗ jump to hunk
Signed-off-by: Brian Masney <redacted> --- This is a new patch introduced in V4. arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 4d5aca3eeb69..c0ddf128136c 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi@@ -16,10 +16,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };-- 2.17.2