Re: [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties

[PATCH v3 0/6] qcom: spmi: add support for hierarchical IRQ chip · Brian Masney <hidden> · 2019-01-10
[PATCH v3 5/6] ARM: dts: qcom: pm8941: add interrupt controller properties · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 5/6] ARM: dts: qcom: pm8941: add interrupt controller properties · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
[PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
[PATCH v3 3/6] gpio: add irq domain activate/deactivate functions · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 3/6] gpio: add irq domain activate/deactivate functions · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
[PATCH v3 2/6] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 2/6] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
Re: [PATCH v3 2/6] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips · Brian Masney <hidden> · 2019-01-11
Re: [PATCH v3 2/6] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
Re: [PATCH v3 2/6] spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips · Brian Masney <hidden> · 2019-01-12
[PATCH v3 4/6] qcom: spmi-gpio: add support for hierarchical IRQ chip · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 4/6] qcom: spmi-gpio: add support for hierarchical IRQ chip · Stephen Boyd <sboyd@kernel.org> · 2019-01-11
[PATCH v3 1/6] pinctrl: qcom: spmi-gpio: hardcode IRQ counts · Brian Masney <hidden> · 2019-01-10
Re: [PATCH v3 1/6] pinctrl: qcom: spmi-gpio: hardcode IRQ counts · Stephen Boyd <sboyd@kernel.org> · 2019-01-11

From: Stephen Boyd <sboyd@kernel.org>
Date: 2019-01-11 21:57:05
Also in: linux-arm-msm, linux-gpio, lkml

Quoting Brian Masney (2019-01-09 17:12:58)

Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.

Signed-off-by: Brian Masney <redacted>
---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help