Re: [PATCH 2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
From: Vignesh R <vigneshr@ti.com>
Date: 2018-12-06 10:32:05
Also in:
linux-omap, linux-usb, lkml
Hi Roger, On 05/12/18 8:49 PM, Roger Quadros wrote:
quoted hunk ↗ jump to hunk
The AM654 SoC from TI contains a DWC3 controller. Add support for it. Signed-off-by: Roger Quadros <redacted> --- Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt index f96e09f..fa29ff8 100644 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt@@ -3,7 +3,7 @@ TI Keystone Soc USB Controller DWC3 GLUE Required properties: - - compatible: should be "ti,keystone-dwc3". + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3".
Convention is to have one compatible per line: compatible: Should be "ti,am654-dwc3" for AM654 SoCs "ti,keystone-dwc3" for K2 SoCs
quoted hunk ↗ jump to hunk
- #address-cells, #size-cells : should be '1' if the device has sub-nodes with 'reg' property. - reg : Address and length of the register set for the USB subsystem on@@ -21,7 +21,7 @@ SoCs only: - clock-names: Must be "usb". -The following are mandatory properties for Keystone 2 66AK2G SoCs only: +The following are mandatory properties for 66AK2G and AM654: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id
-- Regards Vignesh