Re: [PATCH v1 3/3] arm64: dts: qcom: sdm845: Add SD nodes for sdm845-mtp

Hi,

On Wed, Nov 28, 2018 at 2:34 PM Evan Green [off-list ref] wrote:

+&sdhc_2 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
+
+       vmmc-supply = <&vreg_l21a_2p95>;
+       vqmmc-supply = <&vddpx_2>;
+
+       cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
 &qupv3_id_1 {

Please sort alphabetically.  "s" comes after "q".

+       /* It seems that mmc_test reports errors if drive strength is not 16. */

Possibly put this comment right next to one of the the "drive-strength" lines?

+       sd_cd_odl: sd-cd-odl {

"sd_cd_odl" is the name on a different board.  On sdm845 this is
'sd_card_det_n", so it'd be better to use that name.

+               pinmux {
+                       pins = "gpio126";
+                       function = "gpio";
+               };
+
+               pinconf {
+                       pins = "gpio126";
+                       bias-pull-up;
+                       drive-strength = <2>;

Maybe leave this off?  According to Bjorn's research "drive-strength"
has no affect on inputs and this is most certainly an input.

-Doug