Re: [PATCH v2 16/17] power: supply: olpc_battery: Avoid using platform_info
From: Sebastian Reichel <hidden>
Date: 2018-12-05 20:59:59
Also in:
linux-arm-kernel, linux-pm, linux-spi, lkml, platform-driver-x86
Hi, On Fri, Nov 16, 2018 at 05:24:02PM +0100, Lubomir Rintel wrote:
quoted hunk ↗ jump to hunk
This wouldn't work on the DT-based ARM platform. Let's read the EC version directly from the EC driver instead. This makes the driver no longer x86 specific. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <redacted> --- Changes since v1: - Use uint8_t instead of unsigned char [1] for ecver drivers/power/supply/Kconfig | 2 +- drivers/power/supply/olpc_battery.c | 35 +++++++++++++++++++++-------- 2 files changed, 27 insertions(+), 10 deletions(-)diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index f27cf0709500..dd7ae1431098 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig@@ -151,7 +151,7 @@ config BATTERY_PMU config BATTERY_OLPC tristate "One Laptop Per Child battery" - depends on X86_32 && OLPC + depends on OLPC help Say Y to enable support for the battery on the OLPC laptop.diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c index 4433eb10a23d..ec5dfb8fcb8a 100644 --- a/drivers/power/supply/olpc_battery.c +++ b/drivers/power/supply/olpc_battery.c@@ -20,8 +20,6 @@ #include <linux/jiffies.h> #include <linux/sched.h> #include <linux/olpc-ec.h> -#include <asm/olpc.h> - #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */@@ -57,6 +55,7 @@ struct olpc_battery_data { struct power_supply *olpc_ac; struct power_supply *olpc_bat; char bat_serial[17]; + int new_proto; }; /*********************************************************************@@ -100,7 +99,7 @@ static const struct power_supply_desc olpc_ac_desc = { static int olpc_bat_get_status(struct olpc_battery_data *data, union power_supply_propval *val, uint8_t ec_byte) { - if (olpc_platform_info.ecver > 0x44) { + if (data->new_proto) { if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE)) val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (ec_byte & BAT_STAT_DISCHARGING)@@ -608,14 +607,32 @@ static int olpc_battery_probe(struct platform_device *pdev) struct power_supply_config psy_cfg = {}; struct olpc_battery_data *data; uint8_t status; + uint8_t ecver; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + platform_set_drvdata(pdev, data);
This ended up in the wrong patch. Otherwise Reviewed-by: Sebastian Reichel <redacted> -- Sebastian
+ /* See if the EC is already there and get the EC revision */
+ ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1);
+ if (ret) {
+ if (ret == -ENODEV)
+ return -EPROBE_DEFER;
+ return ret;
+ }
- /*
- * We've seen a number of EC protocol changes; this driver requires
- * the latest EC protocol, supported by 0x44 and above.
- */
- if (olpc_platform_info.ecver < 0x44) {
+ if (ecver > 0x44) {
+ /* XO 1 or 1.5 with a new EC firmware. */
+ data->new_proto = 1;
+ } else if (ecver < 0x44) {
+ /*
+ * We've seen a number of EC protocol changes; this driver
+ * requires the latest EC protocol, supported by 0x44 and above.
+ */
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
- "battery driver.\n", olpc_platform_info.ecver);
+ "battery driver.\n", ecver);
return -ENXIO;
}
--
2.19.1 Attachments
- signature.asc [application/pgp-signature] 833 bytes