[PATCH 1/2] arm64: dts: stratix10: Support for Ethernet Jumbo frame
flat view
STALE2910d
From: <hidden>
Date: 2018-10-22 17:26:56
Also in:
lkml, netdev
Subsystem:
arm/socfpga architecture, the rest · Maintainers:
Dinh Nguyen, Linus Torvalds
From: Thor Thayer <redacted> Properly specify the RX and TX FIFO size which is important for Jumbo frames. Update the max-frame-size to support Jumbo frames. Signed-off-by: Thor Thayer <redacted> --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 6 ++++++ arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index d033da401c26..8a2641c742ae 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi@@ -137,6 +137,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; };
@@ -150,6 +152,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; };
@@ -163,6 +167,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; };
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 6edc4fa9fd42..7c661753bfaf 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts@@ -76,7 +76,7 @@ phy-mode = "rgmii"; phy-handle = <&phy0>; - max-frame-size = <3800>; + max-frame-size = <9000>; mdio0 { #address-cells = <1>;
--
2.7.4