Ping for comments

-----Original Message-----
From: linux-kernel-owner@vger.kernel.org [mailto:linux-kernel-
owner@vger.kernel.org] On Behalf Of Jolly Shah
Sent: Friday, September 14, 2018 12:40 PM
To: matthias.bgg@gmail.com; andy.gross@linaro.org; shawnguo@kernel.org;
geert+renesas@glider.be; bjorn.andersson@linaro.org;
sean.wang@mediatek.com; m.szyprowski@samsung.com; Michal Simek
[off-list ref]; robh+dt@kernel.org; mark.rutland@arm.com
Cc: Rajan Vaja <redacted>; devicetree@vger.kernel.org; linux-arm-
kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Jolly Shah
[off-list ref]
Subject: [PATCH v4 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver

Add ZynqMP PM driver. PM driver provides power management support for
ZynqMP.

This patch series is based on top of Xilinx firmware patch set:
https://patchwork.kernel.org/cover/10598195/

v4:
 - Minor fixes to address v3 review comments

v3:
 - Updated DT bindings as per v2 review comments

v2:
 - Rebased on top of latest firmware driver patch series
 - Updated driver to use shared interrupt instead of mailbox

Rajan Vaja (3):
  dt-bindings: soc: Add ZynqMP PM bindings
  firmware: xilinx: Implement ZynqMP power management APIs
  drivers: soc: xilinx: Add ZynqMP PM driver

 .../bindings/power/reset/xlnx,zynqmp-power.txt     |  22 +++
 drivers/firmware/xilinx/zynqmp.c                   |  29 ++++
 drivers/soc/xilinx/Kconfig                         |  11 ++
 drivers/soc/xilinx/Makefile                        |   1 +
 drivers/soc/xilinx/zynqmp_power.c                  | 178 +++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h               |  20 +++
 6 files changed, 261 insertions(+)
 create mode 100644
Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
 create mode 100644 drivers/soc/xilinx/zynqmp_power.c

--
2.7.4